Windows Installation Instructions

1. Download the Pharos_Win_8.1.14.100.zip file from software.geneseo.edu

2. Fully extract or unzip the downloaded zip file by right clicking on the zipped file and choosing “Extract all”.

3. Open the extracted PharosSecure_Win_8.1.14.100 folder.

4. Double-click the PrintScout-Pharos_8.1.14.100.msi file to begin installation.

   1. Do not move the InstallConfig.ini or PrinterDriver.zip files beforehand.

5. Step through the on-screen prompts, accepting all defaults, to complete installation.

6. A Print Scout Configuration window may appear after installation completes called . You can close that window.

7. We suggest opening the “Printers and Scanners” from the System Setting and setting the Pharos Secure Printer as the default printer.

8. You can now proceed to print from any application.

macOS Installation Instructions

1. Download the PharosPrint_Mac_2.29.1.100.zip file from software.geneseo.edu

   1. Make sure to click the download arrow in the upper left corner to download to your local computer.

2. Double-click the PharosPrint_Mac_2.29.1.100.zip file in your downloads folder to unzip its contents.

3. Open the PharosPrint_Mac_2.29.1.100.zip folder after it has unzipped.

4. Double-click the MacPrintScoutInstaller.pkg file to begin installation.

   1. Do not move the InstallConfig.ini or PrinterDriver.tar files beforehand.

5. Step through the on-screen prompts, accepting all defaults, to complete installation

Linux Installation Instructions

The Linux print scout is limited compared to the Windows and macOS scouts. It only installs a print queue called Secure-Printer. It does not install the Pharos Secure Release application or the Setup Guide. In order to view your submitted jobs, you will need to use the Secure Release mobile application, use a Windows or macOS computer to check the Pharos Secure Release application, or you can view your jobs after authenticating at a Pharos Toshiba printer. 

1. Download the SUNYGeneseo_LinuxPrintScout.zip file from software.geneseo.edu

2. Open the SUNYGeneseo_LinuxPrintScout folder after it has unzipped

3. For Ubuntu Linux, run the following command:

   1. dpkg -i openid-print-scout_2.1.0_amd64.deb

4. For Red Hat Linux, run the following command:

   1. rpm -i openid-print-scout_2.1.0_amd64.rpm

5. A printer called Secure-Printer should now be installed and available for use

Troubleshooting

If you accidentally delete the Pharos Secure Printer after it had been previously installed or if the printer is missing, please restart your computer and login. After a few moments, the printer should recreate itself. 

Windows Uninstall/Reinstall Pharos

1. If using a personal device proceed to step 2, if using a campus owned device elevate to Admin using the MakeMeAdmin app.

2. The Pharos cleaner will need to be run in order to fully uninstall the software. In File Explorer go to C:\Program Files (x86)\PharosSystems\PrintScout\

3. Double-click the cleaner file in order to run the uninstall. The file will be called either cleaner.exe or MsiCleaner.exe. A black Windows Terminal screen will pop-up and run the cleaner. This can take a few minutes.

4. Once completed and the Terminal windows closes, restart your computer.

5. Once restart has completed, you can now install the newest version of Pharos using the above instructions on this page.

6. If when you run the installer you see the below image with only the “remove” option available, proceed with “remove” as that means there are still some Pharos components needing to be uninstalled. Once that completes then you can run the installer again and it should successfully install.

Open

Mac Computers

If the normal Pharos troubleshooting does not resolve printing problems, Mac users may need to reset the print system within MacOS or uninstall and reinstall the Pharos Print software.

Reset Printing

Instructions for resetting the print system can be found at this link (note this process will remove all installed printers from the computer):

Reset the printing system on your Mac to solve a problem

Uninstalling/Reinstalling on a College Owned Device

1. You will need to have Admin Privileges to do this. Please click on the Privileges app and type in your password to make yourself an Admin on your Mac.

2. Search for “CIT Self Service” using the Magnifying Glass icon in the top right hand corner of your screen.

3. Find the Pharos Print reinstall application, but DO NOT click on the Reinstall button yet! Click only on the Pharos Print icon and it will give you instructions on how to manually uninstall Pharos Print first.

4. Once that is done (it will tell you that it was successful), you can then click on the Reinstall button under the Pharos Print icon. It will reinstall Pharos Print and this should resolve your printing issues.

   Open

   

Uninstalling/Reinstalling on a Personal Device

1. Click on the Go menu at the top of your screen. Select “Go to Folder…” Type in: /Library/Application Support/Pharos/PrintScout and press Return to go to that location.

2. Find “Uninstall.app” in this folder and double click it to uninstall the program.

3. Once it has finished and was successful (it will tell you it was successful), you can then click on the Reinstall button to reinstall Pharos Print.

Related articles